Showing posts with label funny. Show all posts
Showing posts with label funny. Show all posts

Monday, July 27, 2009

I'm helping - srsly!

I left the fabric, the ironing board and Stormy the kitty unattended for five minutes. Before I left, that fabric was laid out on the ironing board, ready to press. When I came back...not so much.
Yeah, I'm working on another quilt on an impossible deadline.

Because I am an idiot.

Friday, May 29, 2009

Spew warning!

I don't know who wrote this, but for those of us familiar with woodworking and power tools, it is a gut-buster.


PROPER USE OF TOOLS - A Guide for the Noob


DRILL PRESS: A tall upright machine useful for suddenly snatching flat
metal bar stock out of your hands so that it smacks you in the chest and
flings your drink across the room, denting the freshly-painted vertical
stabilizer
which you had carefully set in the corner where nothing could
get to it.


WIRE WHEEL: Cleans paint off bolts and then throws them somewhere under
the workbench with the speed of light. Also removes fingerprints and
hard-earned calluses from fingers in about the time it takes you to say,
"Oh s----t..."


ELECTRIC HAND DRILL: Normally used for spinning pop rivets in their
holes until you die of old age.


SKILL SAW: A portable cutting tool used to make studs too short.


PLIERS: Used to round off bolt heads. Sometimes used in the creation of
blood-blisters.

BELT SANDER: An electric sanding tool commonly used to convert minor
touch-up jobs into major refinishing jobs.

HACKSAW: One of a family of cutting tools built on the Ouija board
principle. It transforms human energy into a crooked, unpredictable
motion, and the more you attempt to influence its course, the more
dismal your future becomes.

VISE-GRIPS: Generally used after pliers to completely round off bolt
heads. If nothing else is available, they can also be used to transfer
intense welding heat to the palm of your hand.

WELDING GLOVES: Heavy duty leather gloves used to prolong the conduction
of intense welding heat to the palm of your hand.

OXYACETYLENE TORCH: Used almost entirely for lighting various flammable
objects in your shop on fire. Also handy for igniting the grease inside
the wheel hub out of which you want to remove a bearing race.

TABLE SAW: A large stationary power tool commonly used to launch wood
projectiles for testing wall integrity.

HYDRAULIC FLOOR JACK: Used for lowering an automobile to the ground
after you have installed your new brake shoes, trapping the jack handle
firmly under the bumper.

EIGHT-FOOT LONG YELLOW PINE 2X4: Used for levering an automobile upward off of a trapped hydraulic jack handle.

E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any
possible future use.

BAND SAW: A large stationary power saw primarily used by most shops to
cut good aluminum sheet into smaller pieces that more easily fit into
the trash can after you cut on the inside of the line instead of the
outside edge.

TWO-TON ENGINE HOIST: A tool for testing the maximum tensile strength of
everything you forgot to disconnect.

CRAFTSMAN 1/2 x 24-INCH SCREWDRIVER: A very large pry bar that
inexplicably has an accurately machined screwdriver tip on the end
opposite the handle.

AVIATION METAL SNIPS: See hacksaw.

PHILLIPS SCREWDRIVER: Normally used to stab the vacuum seals under lids
or for opening old-style paper-and-tin oil cans and splashing oil on
your shirt; but can also be used, as the name implies, to strip out
Phillips screw heads.

STRAIGHT SCREWDRIVER: A tool for opening paint cans. Sometimes used to
convert common slotted screws into non-removable screws.

PRY BAR: A tool used to crumple the metal surrounding that clip or
bracket you needed to remove in order to replace a 50 cent part.


HOSE CUTTER: A tool used to make hoses too short.

HAMMER: Originally employed as a weapon of war, the hammer nowadays is
used as a kind of divining rod to locate the most expensive parts
adjacent the object we are trying to hit.

MECHANIC'S KNIFE: Used to open and slice through the contents of
cardboard cartons delivered to your front door; works particularly well
on contents such as seats, vinyl records, liquids in plastic bottles,
collector magazines, refund checks, and rubber or plastic parts.
Especially useful for slicing work clothes, but only while in use.

DANG-IT TOOL: Any handy tool that you grab and throw across the garage
while yelling 'DANG-IT!' at the top of your lungs. It is also, most
often, the next tool that you will need.

Monday, March 16, 2009

Wednesday, March 11, 2009

Fun at the car rental place

So Ruby, my trusty little 1993 pickup truck, which I have vowed to drive until she is literally dropping chunks of herself in the road, was in dire need of some overdue maintenance and stuff. My dad (aka The DeeDah Person) and my bro collaborated to get Ruby in for repairs and provide me with a rented car to drive while Ruby was being nursed back to health. I ended up with a sporty little Toyota Yaris (a RED one - woot!), which I am certain would be a great car if only I were 5 feet and 2 inches call.

I'm 5 feet and 10 inches tall, though, so driving the Yaris was a bit like driving a helmet. Had maybe 2 inches of space between the top of my head and the interior roof. I suspect that the designer of this vehicle thought he was being terribly innovative and daring when he decided to put the gauge cluster in the center of the dashboard, rather than on the driver's side so that the driver can actually see the speedometer and other somewhat important gauges. I think he needs to spend a few hours driving around with one of those Don'tcha Passengers (you know, the ones who say things like "Don'tcha think you'e going a little fast? Don'tcha think you should turn here? Don'tcha think you should get some gas?"). He might then realize the folly of putting the gauge cluster out there in the middle of the dash so everybody in the car can see it (everybody but the driver, that is). Still, the Yaris got me around (and back and forth to the all-important SSA job) until Ruby's mechanic guy had her ready to go, so I can't really complain. I hurried to get the rental helmet - er, car - back to the rental place in time to avoid being charged for another day, parked myself in the lobby, whipped out my knitting, and waited for my buddy, Keith, to meet me and drive me to retrieve Ruby from the repair garage.

As I was sitting there working on the Knit Picks Essential Multi socks, the woman behind the counter kept drifting over to peek curiously at what I was doing. Then a family came in with a little girl dressed all in pink - except for her Girl Scout vest, which bore many badges. She was adorable! Cocoa brown skin; long black braids; big, liquid brown eyes, and the cutest pumpkin-toothed smile you've ever seen.

Kid took one look at me, and - I swear this is true - teleported the 20 feet between the door and where I was sitting. Poof! She appeared right next to me, and proceeded to explode with questions:

"Whatchadoing? Isthatknitting? That'sknitting,isn'tit? Whatareyoumaking? Canyoushowmehow? Isithardknittingwiththoselittlebittyneedles? Why'sthereastringontheendsoftheneedles? They'recalledneedles,right? How'dyoumakethosestripes? Canyougetdifferentcoloredstripes? What'syourname? Howlongdoesittaketodothat? Didyouworkonthatalot? Where'dyougetthatyarn? DoyouwannabuysomeGirlScoutCookies?"

Her mom came over then, wearing that "Sorry my kid is annoying you" look, which was totally unnecessary, as I love kids. I assured her that Little Miss Cutie was not being annoying at all, and proceeded to try and answer all the kid's questions. The folks were looking like they'd had better days (from overheard bits of conversation, I gathered that their vehicle had suffered a blown engine), so I kept Little Miss Cutie occupied while they made their rental arrangements. I wish I'd had my cell phone out so I could have snapped a photo of her face when I told her I was knitting socks. Her eyes popped open wide for a few seconds, and then she went, "Nuh-uh! Socks? Really? You can knit socks?"

I then showed her the socks I was wearing (orange Opals). Orange, I learned, is her next-favorite color after pink, but her mom says they don't go together at the same time. It turned out that she had received a knit-a-scarf kit for Xmas, but she hadn't done anything with it yet. After explaining to her that she probably wouldn't be able to knit socks from that kit (in response to her "Can I make socks instead of a scarf?" questions), I assured her that if she started out with knitting scarves, she could work her way up to knitting socks one day - and that it was indeed possible to knit pink-and-orange-striped socks.

Honestly, the grin on that kid's face was brighter than the sun!


Monday, March 2, 2009

Must...post...this

My love for blonde jokes compels me to post this:

A highway patrolman pulled alongside a speeding car on the freeway. Glancing at the car, he was astounded to see that the blonde behind the wheel was knitting! Realizing that she was oblivious to his flashing lights and siren, the trooper cranked down his window, turned on his bullhorn and yelled, "PULL OVER!"

"NO!" the blonde yelled back, "IT'S A SCARF!"